↓
 

Mid-Continent Railway Museum

North Freedom, Wis.

Mid-Continent Railway Museum logo banner with images of train cars and people.
  • Home
    • Home Page
    • News
    • Join Our Email List
    • Media
  • Plan Your Visit
    • Buy Tickets
    • Train Ride/Museum Info
    • Special Events
      • Autumn Color™ Weekend
      • Pizza Limited
      • Harvest Flyer
      • Pumpkin Special™
      • Root Beer Float Flyer
      • Santa Express™/Holiday Flyer
      • Stars and Stripes Special
      • Vintage Rail Car Tours
    • Cancellation Policy
  • Gift Shop
  • Restorations
    • Major Projects
    • Steam Status
      • Overview
      • C&NW #1385 Status Updates
      • Western Coal & Coke #1 Status Updates
      • Dardanelle & Russellville #9 Status Updates
    • Car Shop
      • General Updates
      • DSS&A Sleeper DULUTH
      • EJ&S #2
      • Badger #2
      • Copper Range #25
      • MLS&W #63
      • Copper Range #60
  • Equipment Roster
    • Equipment Roster Home
    • Steam Locomotives
    • Diesel/Other Locomotives
    • Wooden Passenger Cars
    • Steel Passenger Cars
    • Wooden Freight Cars
    • Steel Freight Cars
    • Cabooses
    • Service Equipment
    • Former Collection Items
  • Resources
    • Online Archives Home
    • Wooden Car Builders
    • MCRM Newsletters
    • Gazette Archive
    • Audio Archive
    • Video Archive
    • Wallpaper
    • Kids Page
      • Kids Page
      • What Makes A Diesel Locomotive Work?
      • What Makes A Steam Locomotive Work?
  • About Us
    • Contact Us
    • About Mid-Continent
    • Board of Directors
    • Department Leaders
    • Our Staff
    • Become a Member
    • Volunteer
    • Employment
    • Tour of Grounds
    • Local History
    • Mid-Continent Timeline
    • Privacy Policy
  • Donate

Category Archives: Car Shop

Follow the restorations in Mid-Continent’s award-winning Car Shop.

Post navigation

← Older posts
Newer posts →

DULUTH Sleeping Car Awarded $10,000 Grant from ERHT

Mid-Continent Railway Museum Posted on March 20, 2023 by Jeffrey LentzMarch 24, 2023

NORTH FREEDOM, WI – Mid-Continent Railway Museum is excited to announce it has received a $10,000 grant from the John H. Emery Rail Heritage Trust (ERHT) for use on the next phase of restoration on Mid-Continent’s Duluth South Shore & Atlantic Railway (DSS&A) sleeping car “DULUTH”.

The letter board in the process of being stripped and sanded.

Sleeping cars were an integral part of passenger rail travel during the “Golden Age” of railroads.  Extensive research has revealed that the DULUTH sleeping car is historically significant as it is the oldest and most complete standard gauge wooden sleeper car known to survive in the United States.

The DULUTH was built in 1902 by the Barney & Smith Car Company and operated as a 10-section sleeping car on the DSS&A’s passenger train between Sault Ste. Marie, MI and Duluth, MN until 1934. After being taken out of service, it was sold to a private resident of Laurium, MI. and it spent the next 81 years as a summer cabin on the shore of Lake Superior. In 2015, the car was graciously donated to Mid-Continent Railway Museum (MCRM) by Lt. Col. Robert and Elizabeth Krasche to assure the long-term preservation of the railcar.

View in the sleeping compartment showing one of the headliner panels being painted in the original green color.

Since its arrival at MCRM restoration crews have taken significant steps to return the DULUTH to operating condition, with volunteers putting over 2,800 hours of work into the car’s restoration so far. The funds from this grant will further the next phase of the DULUTH’s restoration which will feature work on the sleeping compartment, upholstery work, replicating stained glass windows, and installing new wood siding on the exterior of the car.

This next phase of work is projected to require approximately $125,000 and 3,000 additional hours of volunteer labor. Additional grants and donations are being sought to raise the funds needed to complete this work. Any Individuals or organizations interested in donating funds, professional services, or volunteer labor to help with the DULUTH project are encouraged to contact the museum at 608-522-4261 or email inquiries@midcontinent.org.

Once restored, the DULUTH will be placed indoors on public display. Mid-Continent will also operate the DULUTH on the museum’s rail line several times a year, re-creating and preserving the rail passenger travel experience.

DSS&A original interior
As-built Interior photo of DSS&A DULUTH.

This is the third grant the John H. Emery Rail Heritage Trust has awarded to the DULUTH project. The Trust previously awarded $9,000 in 2018 and $15,000 in 2022 and has supported other museum projects as well, including the C&NW #1385 steam locomotive and the museum’s coach car #595. Mid-Continent Railway Museum is genuinely appreciative of John H. Emery Rail Heritage Trust for its repeated and generous support of the museum’s mission.


About the John H. Emery Rail Heritage Trust

The John H. Emery Rail Heritage Trust was created by John Emery, a native of Chicago, and a lover of the classic passenger trains of America. The Trust was founded as a way to support Mr. Emery’s interests in the passenger trains of the 1920s through the 1950s. The Trust operates as a tax-exempt 501(c)(3) foundation.

About Mid-Continent Railway Museum

Mid-Continent Railway Historical Society–also known as Mid-Continent Railway Museum–is an outdoor, living museum and operating railroad recreating the small town/short line way of life during the “Golden Age of Railroading,” with operating trains, educational exhibits, and displays of restored rolling stock. In 2023 Mid-Continent will be celebrating its 60th anniversary of sharing railroad history with museum visitors.


Read more about the DULUTH’s history
View the DULUTH’s restoration updates
Donate to the DULUTH
Posted in DSS&A Sleeper DULUTH, News | Tagged DSS&A DULUTH

2023 Restoration Department Work Session Dates Announced

Mid-Continent Railway Museum Posted on February 27, 2023 by Jeffrey LentzJune 6, 2023

Mid-Continent’s Restoration Department has released its 2023 work session schedule. These work sessions are a great way to get involved at Mid-Continent Railway Museum.

Our doors are open to anyone willing to give us a hand and help us with the restoration work. Give us a hand for a day or several days throughout the summer. Every bit of help makes a difference and is appreciated. We have a wide range of needs (i.e. painting, cleaning, stripping, wood work, roofing, refinishing, upholstery, metal work, and more) and everyone can be a help.

If you’re interested in volunteering please reach out! To be placed in contact with Bill Buhrmaster, MCRM’s Restoration Manager, send call the museum office at 608-522-4261.

Session No.Dates
1February 24-25-26-27
2March 9-10-11
3March 24-25-26
ExtraNEWLY ADDED DATES!!! April 4-5-6
4April 14-15-16
REVISED DATES!!! April 21-22-23
5April 28-29-30
6May 10-11-12
REVISED DATES!!! May 5-6-7
May 6th is the museum-wide SPRING FLING volunteering day
7May 26-27-28
Volunteer Open House May 27th
ExtraNEWLY ADDED DATE!!! June 6th
8June 10-11-12
REVISED DATES!!! June 9th and 10th
ExtraNEWLY ADDED DATE!!! June 17th
9June 21-22-23-24-25
10July 7-8-9
11July 22-23-24
12August 4-5-6
13August 25-26-27
14September 8-9-10
15Sept 29-30, Oct 1-2
Vintage Rail Car Tours Sept 30-Oct 1
16October 13-14-15
17October 27-28-29
18November 17-18-19
19December 1-2-3
Posted in Car Shop General Updates, News

Duluth, South Shore & Atlantic DULUTH Sleeping Car Restoration 2022 Progress Report

Mid-Continent Railway Museum Posted on February 11, 2023 by Jeffrey LentzFebruary 11, 2023

Introduction

Good progress continued to be made on the DULUTH project in 2022 thanks to a crew of volunteers, hired help, contractors (for stripping, stained glass, brass polishing and woodworking) and many donors. A total of $29,650 in donations was received this past year, with the largest amount coming from the Emery Rail Heritage Trust grant ($15,000).

Stripping off the old varnish and paint finishes on the interior woodwork and vestibules was completed this year, while demolition and removal work continued. In addition to the work on the car, a big push was made this year to purchase and line up materials and restoring parts needed for completing the car. We are now starting to see new parts and pieces going back onto the car.

The main emphasis inside the car continues to be working on restoring the 10-section sleeping compartment that is the middle of the car. In this portion of the car new wiring has begun to be installed for both the berth lights as well as the annunciator system. In addition, new headlining panels were made and several of them were installed in the sleeping compartment.

On the exterior of the car much of the old siding has been removed and we have installed a small section of new siding. In addition, removal of the old roofing is complete while the clerestory side framing removal continues. The upper and lower roof boards are in very good condition, only needing a few localized repairs.

Work on the DULUTH will resume in 2023 with a concentration in the sleeping compartment.

Photos and additional information on the progress made during 2022 on the DULUTH Project follows.

View of the sleeping compartment showing the results from stripping down the woodwork.
View in the sleeping compartment showing one of the headliner panels being painted in the original green color.

Planning

  • Updated 3-year restoration plan
  • Updated the list of the sleeping compartment work tasks and sequence of activities
  • Obtained proposals for reproducing additional wood parts for the car
  • Developing and submitting grant requests for 2023

Design Work

    • Measured and designed the (4) vestibule doors and end windows
    • Acquired samples of the curved upper drip rails (the end drops)
    • Measured and finalized the design for the (3) missing interior doors
    • Designed the upper and lower roof drip edge moldings
    View of the vestibule end window opening that was uncovered so new window frames can be built and reinstalled.
    One of many drawings made during the year. This drawing was developed for reproducing the upper roof drip rail.

    Disassembly Work

    • Removed the balance of the old roofing material from the roof
    • Removed the clerestory wall coverings and roofing on the east side
    • Removed the original lower car siding of the entire car
    • Removed arched window trim (exterior) and battens
    • Removed the intermediate window stops
    • Exposed the framing in the NE end vestibule window opening to expose the original window frame
    • Removed the (4) vestibule doors from the car
    • Removed the hardware off of the (4) vestibule doors
    • Removed the seat cushions from the sleeping compartment and put them into storage
    Volunteers removed the old roofing material off of the roof deck and collected samples of the roof drips rails.
    Volunteers removed the original car siding off the car. Exposed is the car framing which is in very good condition.
    Volunteers in the process of removing the arched window trim, battens and the intermediate window stops.
    Volunteers in the process of removing the arched window trim, battens and the intermediate window stops.
    Two of the vestibule doors that were removed for a pattern.
    Vestibule door hardware that will be restored.

    Stripping

    • Stripped the old finish off of the end vestibules (interior), Women’s room and north aisle. This completes stripping of all of the old finish off of the entire interior of the car.
    • Stripped the paint off of the entire letter board
    • Stripped the paint off of the arched window frames
    • Stripped the old finish off of the headliner trim pieces
    • Removed straps and hinges from upper berth racks
    • Stripped the old finish off of the upper berth racks
    • Removed all of the inner window frames (25) and sent them out for stripping
    • Sent out the berth headboards for stripping
    • Sanded the lower sides of the car (exterior) to remove the old glue off of the wood framing
    A view of the aisle, on the north end of the car. This area was stripped of its old finish in 2022.
    The transom panel above the north door. This area was stripped of its old finish in 2022.
    The letter board in the process of being stripped and sanded.
    The letter board in the process of being stripped and sanded.
    The removable berth headboards staged for delivery to the firm that will strip and refinish them.

    Restoration Work

    Installation and Painting

    • Repaired (7) of the lower roof carlines
    • Cut, fit and glued new car siding on the west side of the car (north end). The section of siding consisted of approximately four feet of the car side.
    • Installed a new vestibule ceiling panel in the SE corner of the car
    • Cleaned, primer and painted the iron work (truss rods, queen posts, etc.) under the car
    New siding that was applied to DULUTH.
    A new ceiling panel installed in the vestibule.

    Materials

    • Ordered replacement specialty wood parts for (window trim, veneer panel, etc.)
    • Test fit the berth divider trim piece in the sleeping compartment
    • Received specialty wood parts made including the clearstory window frames, trim, battens, veneer panels, berth divider trim pieces, etc.
    • Sent out a vestibule door and other wood samples to woodworking shop for replicating the new parts (2023 delivery).
    • Purchased poplar material for the upper and lower drip rails
    • Milled the new upper (inner) and lower drip rail stock
    One of the volunteers test fitting the berth partition trim piece.
    Sample parts from the DULUTH (to the left) and new custom made wood parts made for the DULUTH. Parts include clerestory windows, berth partition trim pieces, window battens and window post trim.
    Custom-made interior trim pieces complete with marquetry to match the original design.
    A complete set of custom made clerestory windows made for the DULUTH. Once complete these frames will be fitted with stained glass.
    New lower roof drip rail (L) based on a sample piece (R) acquired from the car. Volunteers milled the trip rail set at the Fox Valley Technical College.

    Parts and Hardware

    • Cleaned and polished brass hardware for the sleeping compartment of the car. Presently 99% of the berth and sleeping compartment hardware has been obtained, reconditioned and restored.
    • Restored (4) toilet room roof vents for the DULUTH
    • Fabricated a new stack cover for the Baker heater
    • Restored and polished the (20) berth dampers
    • Stained and varnished the wood plunger blocks for the berths
    • Fabricated (6) new steel berth cushion support straps
    • Made replica berth curtain rod end supports (12) and curtain rods (6)
    • Restored the berth ladder for the car
    • Cleaned and polished coach lamps and associated parts (in process)
    • Acquired one of the overhead entryway oil lamps for the car
    • Stripped the paint off of the vestibule door hardware
    • Stripped the brass window catches (100) needed for the car
    • Sent out the wooden berth racks (10) and the (8) headboards for finishing (in process)
    A sampling of the brass window and interior hardware that was cleaned and polished during the year.
    The brass headboard hinges that were cleaned and polished.
    An original toilet room roof vent that was restored.
    Cleaned and polished brass parts for oil coach lamps.
    Wood blocks restored for the upper berth dampers.

    Wiring

    • For safety and reliability purposes the entire car is being rewired. This includes the wiring for all of the interior car lighting as well as the low voltage annunciator system.
    • Removed wall trim around the berth lights to access the wiring
    • Removed all of the existing wiring in the sleeping compartment
    • Installed new wiring for the sleeping compartment berth lamps (Qty. 20). (In process)
    • Installed new wiring for the sleeping compartment annunciator buttons (in process)
    Volunteer installing new wiring for the berth lights in the sleeping compartment.
    Volunteer installing the new wiring for the sleeping compartment annunciator buttons.
    Sleeping compartment annunciator buttons.

    Stained Glass

    • New stained glass material (sheets) from Kokomo Glass were received for the lower arched and oval windows
    • Took receipt of the new stained glass that was cut to size for the lower arched windows
    • Temporarily fit two new pieces of stained glass in the arched window frames
    • Provided the stained glass shop with oval window frames so the new stained glass can be made to fit into the oval windows (2023 delivery)
    A piece of the old stained glass (the large piece) with a sample of the new stained glass (small piece).
    A view of the new stained glass installed in the sleeping compartment of the DULUTH.

    Headliners

    • Cut the plywood to size for the headliners
    • Cut the canvas to size and glued the canvas to the sleeping compartment headliners
    • Painted the only remaining (original) headliner (#10) in the sleeping compartment
    • Painted the new headliner panels (#1-9). (in process)
    • Installed the headliner panels in the car. (in process 4 of 9 installed)
    The new headlining panel being installed in the car.
    One of the completed headlining panels installed in the sleeping compartment.

    Fundraising

    • $29,650.65 in donations were received in 2022. The largest donation came from the Emery Rail Heritage Trust grant ($15,000).
    • The “Giving Tuesday Fundraising Challenge” was met by successfully matching the $1200 challenge, in turn raising a total of $2400 for the DULUTH project.

    Expenses

    Contract work$25,937.62
    Labor$6,945.83
    Supplies$2,456.00
    Freight$187.34
    Total Expenses for 2022$35, 526.79

    Volunteers

    • In 2022 over (20) MCRM volunteers logged (555) man hours of time on the DULUTH project.

    Publicity and Events

    • A film crew from TRAINS magazine was on hand in the Duluth to perform a Trains LIVE video production. The crew filmed inside and outside the car while commentator Bob Lettenberger discussed the history of the car and the restoration process.
    • The DULUTH was opened up for tours in MCRM’s Car Shop during MCRM’s annual Vintage Rail Car Tours.
    • The DULUTH project was featured in the September 26th edition of the Baraboo Newspaper.
    The Trains Magazine crew video taping inside the DULUTH.
    A tour being conducted in the DULUTH.

    William Buhrmaster

    MCRM Restoration Department

    December 22, 2022

    Posted in Car Shop, DSS&A Sleeper DULUTH

    DULUTH Fundraising Status

    Mid-Continent Railway Museum Posted on December 16, 2022 by Jeffrey LentzDecember 29, 2022
    Created using the Donation Thermometer plugin https://wordpress.org/plugins/donation-thermometer/.$75,000‘Thanks$67,823‘Thanks90% Other Donors ($39,573) SLHTS ($1,250) Dailey Foundation ($3,000)Emery Trust ($24,000)

    A $75,000 fundraising effort is presently underway to allow major material acquisition and some labor cost for the DULUTH to allow its restoration to move forward. This post will be updated regularly to show progress toward reaching that goal.

    To help Mid-Continent restore the DULUTH to its former glory, please consider making a donation to the DSS&A Sleeper DULUTH Fund. Donating is tax-deductible and easy to do. You can make your donation via mail or donate online using the Donate button.

    DONATE

    Be sure to write in “DSS&A Sleeper DULUTH Fund” on the printable donation form or check memo line if sending a donation by mail. Credit/debit card donations can also be accepted via phone at 608-522-4261 or 800-930-1385 by speaking to our staff during administrative office hours Monday-Friday.

    The fundraising total shown is as of December 29, 2022. The fundraiser began in May 2019. Total excludes monies raised through separate fundraisers, such as the Buy-A-Berth campaign and Matching Your Funds matching fund drive.

    DULUTH Sleeping Car Receives $15,000 Grant

    Mid-Continent Railway Museum Posted on March 23, 2022 by Jeffrey LentzMarch 23, 2022

    We are very pleased to announce that Mid-Continent Railway Museum has received a $15,000 grant from the John H. Emery Rail Heritage Trust (ERHT) for use on Mid-Continent’s Duluth South Shore & Atlantic sleeping car “DULUTH”.

    The DULUTH was built in 1902 by the Barney & Smith Car Company. The 10-section sleeping car operated daily on the DSS&A’s passenger train between Sault Ste. Marie, MI and Duluth, MN until 1934. After the car was taken out of service it was sold to a private resident of Laurium, MI and it spent the next 81 years as a summer cabin on the shore of Lake Superior. In 2015 the car was donated to MCRM and in 2016 the DULUTH was moved to the MCRM, where restoration work began to return the car to its original configuration and operating condition. For additional historical information, see the DULUTH’s Roster Page.

    Much work has been done to date to restore the car. To date, volunteers and employees have dedicated a combined 3,200+ hours working on the DULUTH. This 2022 grant from the ERHT will enable MCRM to focus on the sleeping compartment, making new stained glass windows and performing some exterior work. Once this phase is completed, restoration of the car’s other interior sections, seat upholstery, carpeting and the exterior restoration will take place as separate phases of the whole project.

    This is the second grant the John H. Emery Rail Heritage Trust has awarded to the DULUTH project. The Trust previously awarded $9,000 for the DULUTH in 2018 and has supported other museum projects as well, including the C&NW #1385 steam locomotive and the museum’s DL&W #595 coach car. Mid-Continent Railway Museum sincerely thanks the John H. Emery Rail Heritage Trust for their most generous grant.


    About the John H. Emery Rail Heritage Trust:

    The John H. Emery Rail Heritage Trust was created by John Emery, a native of Chicago, and a lover of the classic passenger trains of America. The Trust was founded as a way to support Mr. Emery’s interests in the passenger trains of the 1920s through the 1950s. The Trust operates as a tax-exempt 501(c)(3) foundation


    Volunteer Kathy removes decorated trim pieces from the DULUTH sleeping car’s arched windows. William Buhrmaster photo.
    Volunteer Nancy removes trim pieces from the DULUTH sleeping car’s windows. William Buhrmaster photo.
    Stu pulles wires for the berth lamps in the DULUTH’s sleeping compartment. February 20, 2022. William Buhrmaster photo.
    March 17, 2022 progress photo showing stripping the interior finish off the DULUTH sleeping car’s walls. Stripping of the entire interior is 90% complete. William Buhrmaster photo.
    Progress photo taken March 17, 2022 showing stripping of the DULUTH sleeping car’s interior woodwork. William Buhrmaster photo.

    Post navigation

    ← Older posts
    Newer posts →
    QUICK LINKS
    PLAN YOUR VISIT
    BUY TICKETS
    GIFT SHOP
    DONATE
    JOIN OUR EMAIL LIST
    VIEW WEBCAMS
    Live view of North Freedom depot

    Contact Us

    Mid-Continent Railway Museum
    P.O. Box 358
    E8948 Museum Road
    North Freedom, WI 53951
    Office phone: 608-522-4261
    or 800-930-1385
    E-mail: inquiries@midcontinent.org

    Recent News

    • “Last Spike” Ceremony
    • Engine House Track #2 Update
    • 1385 Steam and Air Line Installation/Donation Update
    • #1385 Cab, Smoke Stack, and Hand Rail Installation/Donation Update
    • Your Help is Needed to Bring the C&NW #1385 Home Again!
    ©2025 - Mid-Continent Railway Museum - Weaver Xtreme Theme Privacy Policy
    ↑